Post-construction facade and window cleaning: manual scraping and drone washing before handover
Post-construction drone cleaning is the last and one of the most important stages of any building project. Aquadrone's building cleaning services specialise in cleaning new buildings once construction is complete. Before cleaning, our team manually scrapes hardened concrete, plaster and paint residue off the facade and windows, and then the drone washes the facade and windows with purified water and removes construction dust. […]
Drone post-construction cleaning is one of the most important final stages of any building project. Aquadrone's commercial building cleaning service specialises in cleaning new buildings once construction work is finished. Before cleaning, our team hand-scrapes hardened concrete, render and paint residue from the facade and windows, then the drone washes the facade and windows with purified water and removes the construction dust. The service covers the exterior facade only.
Every building project leaves a lot of dirt on the exterior facade. Construction dust, lime stains, cement residue and paint marks cover the facade, windows and curtain walls. Professional post-construction cleaning is essential before the building is handed over to residents or opened to the public.
What's left on the facade after construction?
Construction work leaves different kinds of dirt on the facade. Lime and cement stains harden on glass and cladding and need special removal. Fine construction dust gets into every corner and covers every surface. Paint and render residue marks the windows and aluminium frames. Rust stains from construction equipment appear on concrete and stone. All of this needs professional cleaning in two stages: solid residue such as concrete, render and paint is first removed by hand scraping, then the drone washes the construction dust off the facade and windows.
Why is a drone so well suited to post-construction cleaning?
Active building sites are usually surrounded by fences and obstacles that make it hard to put up scaffolding. The drone flies over every obstacle and cleans the whole facade precisely. Drone cleaning is also faster, which helps meet the tight schedules of building projects.
Another advantage of drone post-construction cleaning is the ability to document the facade's condition right after construction is completed. This documentation matters to contractors and property owners as a record of the building's condition on handover day. If there is a dispute about damage later on, the photos and videos from the drone provide clear, professional evidence. The summary report Aquadrone provides after cleaning also includes routine maintenance recommendations to help keep the new building looking good for years.
Post-construction cleaning stages
Post-construction cleaning follows a set sequence. First, the drone surveys the whole facade and identifies the different types of dirt. Next, the team hand-scrapes concrete, render and paint residue wherever it is found. The drone then washes the facade and windows with purified water, matched to the cladding type. Finally, a follow-up check is carried out and you receive a summary report with photos of the facade after the work.
What it suits – and what it doesn't
- Suitable for drone washing: Construction dust, water marks and general dirt on glass, aluminium and cladding.
- Removed by hand scraping: Concrete, render and paint residue. The drone doesn't remove concrete or paint, so the team scrapes them off by hand before washing.
- Not included: Interior cleaning. We work on the exterior facade only.
How the work runs
- You send us a video or photos of the facade.
- We agree a date that fits the site schedule, including the option of working after hours.
- The team hand-scrapes concrete, render and paint residue.
- The drone washes the facade and windows with purified water.
- A follow-up check and a summary report with photos of the facade after the work.
Work without stopping the site
The work can also be done after hours and at night, so cleaning doesn't interfere with finishing works, residents or the handover.
What affects the cost
The cost depends on the building's height, the facade area, how much residue needs to be scraped off by hand and ground access around the building. Every project is priced individually – send us a video of the facade and we'll get back to you with a quote.
Read the full guide to drone facade cleaning.
FAQs
Does the drone remove concrete and paint residue?
No. Concrete, render and paint residue is removed by our team's hand scraping, and the drone washes the facade after scraping.
Do you clean inside as well?
No. The service covers the exterior facade and the outside of the windows only.
Can you work when the site is closed?
Yes. The work can be done after hours and at night, so as not to disrupt work on site.
What do you get at the end of the job?
A summary report with photos of the facade after cleaning.
How much does it cost?
The cost depends on the height, the facade area and the amount of residue. Send us a video of the facade and get a quote.
Send us a video of your facade on WhatsApp: 053-4641133 – we'll get back to you with a quote.
New building facade maintenance: why drone cleaning from handover pays off
New building facade maintenance starts on handover day. How drone cleaning protects glass, aluminium and stone, avoids scaffolding and helps prevent costly repairs over the years.
Alucobond cleaning: how to clean composite panels without damaging the finish
Alucobond cleaning needs a gentle touch: what makes panels look dull, why we work at low pressure with detergent that is rinsed off quickly, how joints are handled and how a drone works on these facades.
How to choose a facade cleaning company: 10 questions to ask before you sign
How do you choose a facade cleaning company? A checklist of 10 questions to ask before signing, covering method, scope of work, insurance, exclusions and documentation, plus warning signs to look out for.
Aluminium and Alucobond cladding cleaning: what manufacturers recommend and how to protect the paint
Aluminium and Alucobond cladding cleaning: what manufacturers' guidelines say about detergents, water pressure and working hours, and how to plan cleaning that doesn't damage the painted finish.
Drone factory facade cleaning: how cleaning protects the building from wear and cracks
Drone cleaning of factory, warehouse and logistics centre facades: what builds up on the envelope, how soot, mould and salts contribute to wear and cracks, and how to clean without scaffolding or disrupting operations.
Stone facade cleaning: how to clean natural stone without damaging it
Stone facade cleaning calls for a gentle method: why acid and high pressure harm natural stone, how drone cleaning works without touching the stone, and what to check before you start.
Commercial facade cleaning: why shops, malls and offices can't afford to neglect it
How a business's exterior influences a customer's decision to walk in, before they even step inside
Cleaning inaccessible areas of buildings: a solution that finally reaches everywhere
Why part of the facade always gets "forgotten" in traditional cleaning, and how to fix it
Facade cleaning in Tel Aviv
Professional facade and window cleaning for Tel Aviv and Gush Dan
Drone roof cleaning
A safe, efficient solution for cleaning roofs of every type and size
Drone cleaning of bridges and infrastructure
An advanced solution for cleaning infrastructure and complex structures at any height
Drone brick cleaning and mould removal
A professional solution for removing mould, stains and stubborn dirt from brick facades
Building cleaning without scaffolding
How drones are replacing scaffolding and rope access for cleaning buildings at height
Facade stains: why dirt, limescale and pigeon droppings get harder to remove over time
Facade stains get harder to remove with every month. Why limescale, soot and pigeon droppings etch into the facade, and how early maintenance prevents permanent stains.
Drone high-rise window cleaning
Drone high-rise window cleaning: an advanced, safe solution
When should you clean your building facade? 6 signs it's time
When should you clean your building facade? The signs it's time: dark streaks under windows, limescale on glass, blackened stone and pigeon droppings, and how to clean without disruption.
Why building cleaning matters
The signs that it's time to clean, and why putting it off only makes treatment more expensive
Drone solar panel cleaning
The right maintenance for maximum output
The direct link between facade maintenance and property value
A look at how smart maintenance protects a property's value.